Chewing gum becomes a habit nowadays for the vast majority of people. Undoubtedly, it can represent a method to counteract the stress of everyday life. Unfortunately, this little pastime could unintentionally stick to your own floor tiles. There are a few little tricks on how to remove chewing gum from tiles. So let’s see how to remove the tires from the floor of your home.
Unfortunately, when chewing gum sticks to a floor, it can take a lot of time and energy to remove it. The positive side is that it can solve this drawback by implementing various methodologies.
First, you could start removing it using a normal magnetic card, such as a credit card that you no longer use, a hard plastic, or even a scraper bought in a hardware store.
It is necessary to proceed very patiently, making delicate but decisive movements to not cause any scratches on the floor, especially if you use a metal scraper.
If this didn’t work and the chewing gum still sticks firmly to the floor, then you might want to try using ice. Clearly, a cooler bag or a few ice cubes are available in every home. All you have to do is place them directly on the gum and hold them in place until it hardens.
Subsequently, you can proceed to scrape it using a metal scraper. If should considerably extend the area to be cleaned, it is advisable to repeat this operation until the rubber is completely removed.
To clean any marks that may remain on the floor, you could use a corner of a cloth soaked in vinegar. It is sufficient to pass it on to the area to be treated, making energetic movements and rubbing until total cleansing.
Another method could be to use the hairdryer, proceeding in the way that we will describe now. Please turn on the appliance and position the hot air outlet at a short distance from the rubber to be removed, waiting for it to soften more. At this point, use the usual scraper to remove it.
Also, in this circumstance, to carry out a thorough cleaning, it is recommended to use a cloth soaked in vinegar. If all of these methods don’t work properly, then we could use butter. Then take a small piece of this ingredient and spread it on the spot to be cleaned.
At the same time, help yourself with the scraper, lifting the rubber and scraping gently. Proceed until all the dirt has been permanently removed. Finally, clean, using the vinegar and the cloth. Should the grease spot remain in place, must repeat the entire operation?
The last solution could be to use solvents, easily available in any hardware or paint shop. Our advice is to use this method only after having previously tried it with others. But, again, we are talking about some substances that have chemical components capable of ruining the floor.
