If you are about to repaint the interior of your home or just a few rooms, you could opt for the type of paint that is called ” washable. ”
This definition indicates that, with specific solvents, it is possible to give back to the brightness and freshness of painting and, at the same time, it is also possible to proceed with the washing of the walls when they get dirty and must be cleaned, for example, with a sponge.
Let’s see how specifically to clean the walls with washable paints. Read the guide below to learn more about how to paint with washable paint.
As a first step is indispensable, before proceeding with the washing of the wall of the room to which we want to restore to shine, remove all the dust that has been to accumulate over time. To do this, you can take advantage of the aid of a dry cloth, which is going to pass on the whole surface.
This is a critical step that will allow the wall to accommodate the new color in the best way, and the painting itself will adhere perfectly to the surface when you go to repaint the wall.
During this operation, especially if the roofs are very high, you will find it difficult to reach the higher areas and out of hand. In this case, you must necessarily aid of a broom, extending if possible, which previously covered with a cloth, and remove excess powder.
After washing away the dust from the surface, try to use a cloth soaked in water, especially if the wall was filthy. Usually, this is enough to give back freshness to the wall. If not, you’ll have to resort necessarily to repaint the wall surface.
In case you are not satisfied, or in the case where the wall presents some stain, you will need to remove the stain; otherwise, you could see it reemerge as soon as you wipe the painting (unless it is painting very opaque).
To do this, let’s make use of detergent’s help and pay particular attention to the label. You can use a mild detergent, as you risk damaging the painting because washable paints bear the water but certainly not aggressive cleaning agents.
