Advice for the maintenance and care of the Rubber Floor

1,898

Within this guide, we will talk about household chores. Specifically, we will enter the care field for a particular flooring type, namely the rubberized one. Then, we will try to offer a series of exhaustive advice to answer this question: how do you carry out the rubber floor’s exhaustive maintenance and care?

Enjoy the reading. The rubber floor is a coating with considerable resistance, with a high electrical insulation capacity, and characterized by excellent comfort: it is perfect for environments particularly frequented by the elderly or children or for gyms, as it helps not to slip and softens blows. Received during any falls.

Needed: Metallic wax, Neutral detergent single brush machine, or scrub brush.

The rubber floor, chosen according to the preferred texture and color, is obtained from a mixture of natural rubber or rubber and colored pigments; it is then transformed, pressed, and transformed into sheets through a special process.

The latter is a product that is absolutely satisfactory for anyone looking for a durable, insulating, and resistant cover to the stress of different types. However, although it is a decidedly resistant element, it is necessary to treat it adequately.

First of all, when you decide to adopt this kind of floor, once the installation is complete, it is good to apply a light layer of specific metallic wax for rubber: it is an excellent emulsion that closes the tiny porosities present on the surface, time valid protection, this treatment gives the flooring a charming semi-gloss effect.

Going into detail on the side of daily household cleaning, they will not force the application of particular complex procedures because it will be enough to wash with a neutral detergent using a wet cloth. But, clearly, you should not exceed the amount of water used to limit it.

According to the type of use, it may be necessary to proceed with periodic extraordinary cleaning. On this occasion, it is necessary to use special single-brushing machines, or it may be sufficient to use a brush avoiding too stiff bristles.

With this system, the dirt is adequately removed, while any residues are eliminated by passing a wet cloth and then wiping each part thoroughly with a dry cloth. Finally, it is necessary to distribute a further veil of metallic wax.

Note: Possibly avoid water stagnation.